The cycle of application includes the following recommendations:
1) PREPARATION OF SURFACES Verify that the materials to protect are free of grease, fats, oil, waxy impregnating and preesisting varnishes. Existing paint coats must be removed by sandblasting or by sandpapering with coarse grain and then fine abrasive paper at naked wood. After this operation, in order to ensure maximum adherence of fire-retardant paint on the support, carry out further cleaning using a dampened cloth with nitro thinner to remove completely from wood traces of wax. It should be checked carefully that the humidity of the wooden materials to coated is less than the value of 12% in weight. If the conditions of preparation above indicated are not respected, we don’t give any guarantee of durability of treatment.
2) TREATMENT OF SUBSTRATE Application of our product STARWOOD/S, synthetic primer, in amount of 80-100 g/m² in order to confer resistance to mold and pests of wood (this treatment should be done on naked wood). The product is furnished in transparent or colored version.
3) FIREBLOCK TR Application of one coat of varnish FIREBLOCK TR with a consumption of 100 g/m². After approx. 12 hours, sandpapering and application of a second coat with a consumption of 100 g/m². After approx. 12 hours, sandpapering and application of a third coat with a consumption of 100 g/m². The total quantity of paint applied, therefore, amounts to 300 g/m² distributed over three coats.
For more information please fill out and submit the form below
To request more information and/or quotation on all products Starkem, fill out and submit the form below. Inserted data shall be used only to replay to your requests. Mandatory fields (*).